Page tools



Franki Piles (PIFs)

Franki Piles, also known as Pressure Injected Footings (PIFS), are high-capacity cast-in-place deep foundation elements constructed using a drop weight and casing. A 2 to 3 foot diameter steel casing is vertically positioned at a planned PIF location. The bottom 3 to 5 feet of the casing is filled with a very dry concrete mix. A steel cylinder with a diameter slightly less than the casing is then repeatedly dropped inside the casing on the dry mix. The mix locks into the bottom of the casing and the repeated blows of the drop weight advance the casing to the design depth. The casing is then restrained from further advancement and additional weight drops expel the dry mix out of the bottom of the casing. Additional dry mix is added and driven from the casing until a design resistance to further displacement is achieved. Reinforcing steel and concrete are then placed in the casing and the casing is extracted. The finished foundation element resists compressive, uplift and lateral loads. The technique has been used to support buildings, tanks, towers and bridges.

This technique is predominately provided by our Providence, RI office, and is available throughout North America. Contact your local Hayward Baker office for more information.

View/Downloads

Video and Image Gallery